Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | F050 |
| Pas (mm/mil) | 1,27 / 50 |
| Température | -45°C...+80°C |
| Définition complémentaire | HPL |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 45.2 |
| Hauteur hors tout (mm) | 10.1 |
| Diamètre du style de pointe (mm) | 0.5 |
| Diamètre du fût (mm) | 0.78 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 43 |
| Matériau du piston | Steel |
| Revêtement du piston | Progressive |
| Matériau du fût | Bronze |
| Revêtement du fût | Gold |
| Matériau du ressort | Spring steel |
| Revêtement du ressort | Gold |
| Spécifications mécaniques | |
|---|---|
| Précontrainte (cN) | 120 |
| Force du ressort (cN) | 200 |
| Course nominale (mm) | 4.3 |
| Course maximale (mm) | 6.4 |
| Précision de pointage +/- (mm) | 0.05 |
| Spécifications électriques | |
|---|---|
| Courant continu (A) | 3 |
| Résistance de contact typique (mΩ) | 40 |
Graphiques
Beschreibung des Produkts
F05043S050P200HPL (item number 1026814) is a Basic Contact Probe for repeatable temporary connections between the test system and a test point. With tip style 43 (Square lance 90°), F05043S050P200HPL combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F05043S050P200HPL combines a pitch of 1.27 mm / 50 mil with tip style 43 (Square lance 90°) and a tip diameter of 0.5 mm. For F05043S050P200HPL, spring force is 200 cN at a nominal travel of 4.3 mm. F05043S050P200HPL is rated for 3 A continuous current with a typical contact resistance of 40 mΩ. Two features address difficult surface conditions on F05043S050P200HPL: Progressive Coating reduces contamination sensitivity, while the HP spring provides increased preload at the start of the contact stroke.