Datos técnicos
| General | |
|---|---|
| Estructura | Basic Contact Probe |
| Tipo/Familia | F588 |
| Paso (mm/mil) | 2,54 / 100 |
| Temperatura | -45°C...+80°C |
| Definición adicional | HPRP |
| Dimensiones | |
|---|---|
| Longitud total (mm) | 39 |
| Altura sobresaliente (mm) | 14.1 |
| Diámetro del estilo de punta (mm) | 0.6 |
| Diámetro del casquillo (mm) | 1.37 |
| Materiales y superficies | |
|---|---|
| Estilo de punta | 10 |
| Material del émbolo | Steel |
| Recubrimiento del émbolo | Progressive |
| Material del casquillo | Nickel silver |
| Recubrimiento del casquillo | Gold |
| Material del resorte | Spring steel |
| Recubrimiento del resorte | Silver |
| Especificaciones mecánicas | |
|---|---|
| Precarga (cN) | 110 |
| Fuerza del resorte (cN) | 150 |
| Recorrido nominal (mm) | 7.6 |
| Recorrido máximo (mm) | 8.8 |
| Precisión de punteo +/- (mm) | 0.1 |
| Especificaciones eléctricas | |
|---|---|
| Corriente continua (A) | 5 |
| Resistencia de contacto típica (mΩ) | 60 |
Gráficos
Beschreibung des Produkts
The Basic Contact Probe F58810S060P150HPRP (item number 1035800) is a spring-loaded probe for temporary electrical contact with test points. With tip style 10 (Flexible needle), F58810S060P150HPRP combines ICT/FCT use with a geometry intended for solder pads and vias. F58810S060P150HPRP combines a pitch of 2.54 mm / 100 mil with tip style 10 (Flexible needle) and a tip diameter of 0.6 mm. For F58810S060P150HPRP, spring force is 150 cN at a nominal travel of 7.6 mm. F58810S060P150HPRP is rated for 5 A continuous current with a typical contact resistance of 60 mΩ. The plunger in F58810S060P150HPRP is made of steel and uses Progressive Coating.