Données techniques
| Généralités | |
|---|---|
| Structure | Basic Contact Probe |
| Type/famille | F786 |
| Pas (mm/mil) | 2,54 / 100 |
| Température | -45°C...+80°C |
| Définition complémentaire | HP |
| Dimensions | |
|---|---|
| Longueur totale (mm) | 38 |
| Hauteur hors tout (mm) | 16 |
| Diamètre du style de pointe (mm) | 1.3 |
| Diamètre du fût (mm) | 1.66 |
| Diamètre du collet (mm) | 2.04 |
| Diamètre de la bague de serrage (mm) | 2.04 |
| Matériaux et surfaces | |
|---|---|
| Style de pointe | 33 |
| Matériau du piston | Steel |
| Revêtement du piston | Progressive |
| Matériau du fût | Nickel silver |
| Revêtement du fût | Gold |
| Matériau du ressort | Spring steel |
| Revêtement du ressort | Silver |
| Spécifications mécaniques | |
|---|---|
| Précontrainte (cN) | 180 |
| Force du ressort (cN) | 300 |
| Course nominale (mm) | 6.4 |
| Course maximale (mm) | 8 |
| Précision de pointage +/- (mm) | 0.1 |
| Spécifications électriques | |
|---|---|
| Courant continu (A) | 5 |
| Résistance de contact typique (mΩ) | 50 |
Graphiques
Beschreibung des Produkts
The Basic Contact Probe F78633S130P300HP (item number 1013217) is a spring-loaded probe for temporary electrical contact with test points. With tip style 33 (Square lance 38°), F78633S130P300HP combines ICT/FCT use with a geometry intended for vias and solder pads where the edges can break through residues and oxide layers. F78633S130P300HP combines a pitch of 2.54 mm / 100 mil with tip style 33 (Square lance 38°) and a tip diameter of 1.3 mm. For F78633S130P300HP, spring force is 300 cN at a nominal travel of 6.4 mm. The electrical rating of F78633S130P300HP combines 5 A continuous current with 50 mΩ typical contact resistance. On F78633S130P300HP, Progressive Coating works together with the higher preload of the HP version, targeting test points affected by OSP, flux, oxidation or other contamination rather than treating the coating as an isolated feature.